top of page
VFD Back Right View
  • Shapeoko Pro Series - Air Cooled, 2.2Kw (80mm DIA) Plug & Play Spindle Kit

    Upgrade your Shapeoko Pro Series CNC with this top-of-the-line plug and play REDLINE Spindle Kit.

     

    REDLINE Spindles are the most reliable Plug & Play Spindle kits on the market today! Featuring an all metal VFD enclosure that's properly grounded, shielded and filtered and a high quality Spindle that uses four (4) ceramic bearings that reduced rolling resistance, increased durability, increased stiffness and minimize damage caused by cold starts.

     

    REDLINE Spindle kits are designed for optimal performance and reliability.  Take your Onefinity to the next level with the plug and play Redline spindle kit.

     

    Featuring:

    Sleek all-metal VFD enclosure that not only looks great but also dramatically reduces EMI and heat issues.

     

    High quality Spindle that comes standard with 4 (Four) ceramic bearings that reduce rolling resistance, increase durability, increase stiffness and minimize damage caused by cold starts.

     

    Shielded Spindle cable with High Frequency noise filter keeps the VFD noise were it belongs inside the enclosure.

     

    Display with built in manual over-ride switch that can be mounted in a convenient location, whether it's on the wall, VFD, or MASSO.

     

    All Cables and Wires properly grounded and shielded

     

    Inputs control signals use shielded cable that's properley grounded and input filters for noise free control.

    Properly sized AC Line filter to keep noise off the power lines

    Fully wired and programmed with PWM and RJ-485 controls

    Manual speed setting switch to adjust speed if your controller can’t.

    Spindle is full grounded for safety back to the Chassis.

    Wall mount or Desktop Stand with input dust filter to keep the dust out of you VFD.

    Air Cooled for simple and compact instillation.

    CSA/UL

     

    What's Included:

    Pre-programed All Metal VFD 

    High quality 2.2Kw, 80mm DIA Spindle with Ceramic Bearings 

    Display with built-in manual over-ride switch

    Complete set of Cables

    Collet inserts

    Collet Wrenches

     

    Specifications

    Power: 2.2 KW

    Voltage: 220V

    Body Diameter: 80mm

    Collet: ER20

    Frequency: 400 Hz

    Speed: 8000-24000 R/min

    Runout: Less than 0.01 mm

     

    Benefits of Ceramic Bearings
    Reduced rolling resistance mainly results from the ceramic balls’ increased smoothness, dimensional stability, and increased uniformity over steel ball bearings. These properties ensure that applied loads are uniformly distributed over all rolling elements. Additionally, ceramic materials have a significantly lower coefficient of friction (~20–30 times less) than steel ball bearings with standard seals and lubrication. This reduced friction results in reduced rolling resistance and faster rotational speeds. The reduced weight of ceramic bearings also contributes to their overall enhanced performance over steel bearings. Ceramic materials can weigh up to 40% less than comparable steel bearings. This reduced weight translates to decreased centrifugal loads exerted on the outer race as the bearing spins. This reduction of forces allows ceramic bearings to operate up to 20–40% faster than conventional steel bearings while using considerably less energy to maintain their speed. Ceramic bearings are also harder than steel bearings and therefore are more durable. Studies show that ceramic bearings can last anywhere between 5 and 20 times longer. The smoother surface of the ceramics also significantly reduces the risk of bearing seizure with little to no lubrication. Furthermore, ceramic bearings can operate in harsh environments due to their resistance to corrosion and degradation. Finally, their electrical insulation properties eliminate the risk of electrical erosion and pitting of the rolling elements.

     

    Air Cooled Spindle versus Water Cooled Spindle: Which is right for you?

    • PRODUCT INFO

      REDLINE Spindles are the most reliable Plug & Play Spindle kits on the market today! Featuring an all metal VFD enclosure that's properly grounded, shielded and filtered and a high quality Spindle that uses four (4) ceramic bearings that reduced rolling resistance, increased durability, increased stiffness and minimize damage caused by cold starts.

    $975.00 Regular Price
    $828.75Sale Price

    RELATED PRODUCTS

    bottom of page